How to Setup Audio Detection with your Security Camera System / CCTV Camera World Knowledge Base Leave a comment


Audio Detection is a feature that can be a very reliable way to capture a conversation or other important sounds that need to be recorded. It allows a security camera with a built-in microphone or audio input to trigger recording when sound is detected. You no longer have to rely on video-based motion detection to try and capture audio of an event and missing out on everything that was said. With audio detection you can even capture video/audio when persons are conversing outside the camera’s field of view, but near enough to activate audio detection. You can finely adjust the sensitivity and threshold settings to decrease your storage needs. In this guide we show you how to setup and use audio detection with surveillance cameras purchased from CCTV Camera World.

How to enable Audio Detection on your NVR






With Audio Detection you can set up alerts and triggers like you would for traditional video detection. Email, buzzer, and alarm upload features are all supported when an audio event is detected allowing you to be notified immediately. This can save you a lot of time of having to sift through hours of continuous audio/video looking for a small segment of conversation or sound.

What do you need for Audio Detection to work?

  1. An IP security camera with built-in microphone
  2. Or an IP camera with audio input for a security camera microphone (microphone not included)
  3. A compatible NVR system that supports audio detection
  4. Audio stream enabled on the camera in the Encode settings
  5. Storage schedule enabled for Alarm based recording

How is Audio Detection setup?

1. Mount the camera or microphone to capture good sound, and picture

It is important that you mount the camera strategically to capture good video and audio. This includes making sure that the camera or microphone is not near constant background noise that will trigger audio detection and create false alerts. Conversely ensure that the audio device is close enough to capture the desired recording. Keep in mind that sensitivity settings can be adjusted and fine tuned for most applications. Mount the camera pointed in a direction and angle where the sound will be coming from to avoid missing out on important footage.

2. Enable Audio Detection on the NVR

  1. Navigate by right clicking and then using the Main Menu button
  2. Login to the DVR using the graphical password or username and password
  3. Click to the Alarm section at the top right of the screen
  4. On the left-hand side click the Audio Detection tab
  5. To enable Audio Detection make sure you tick the checkbox labelled Intensity Change and click apply
  6. The Enable Input Abnormality option is meant to detect when audio has stopped working or if the audio input or microphone has been compromised by vandalism.

3. Finely Adjust your audio detection settings

  1. Under the Intensity Change text box you will find there are two bars for adjustment:
  2. Sensitivity
    – It is important to change as this setting will increase or decrease the amount of sound required to trigger an event above the threshold. Sensitivity is a finer setting than the Threshold setting.
  3. Threshold – This setting determines how loud a sound must be to trigger an Audio Detection event, if you are getting too many false alarms increase the Threshhold setting.

4. Select the event trigger settings according to your needs

After you have your camera and recorder detecting the audio it’s important to make sure you set up the proper schedule and events to trigger after audio is detected.

  1. Open the Schedule setting to set the schedule for the camera to detect audio
  2. Record Channel can be selected if you want to record video for that channel, or additional channels you have connected to your recorder
  3. Post record is the amount of time to record after the audio event has ended and there is no more sound triggering the event
  4. Alarm out provides an option to sound an optional alarm that is connected to the recorder if the NVR supports it
  5. Picture Storage allows you to capture a snapshot of the scene in the video if snapshot recording is enabled
  6. PTZ Linkage can have a PTZ pan, tilt and zoom to a specific preset
  7. Tour is the display tour for the monitor to show that channel, or a set of channels when the event triggers
  8. Other features include Push notifications, Email, or Buzzer that are useful for additional alerts.
Matt Rossi is a Technical Support Manager at CCTV Camera World, a leading CCTV Camera distributor located in Buffalo, NY. He is a technical support expert for everything video surveillance related.

 

Connect with Matt via: Facebook



Source link

Leave a Reply

Your email address will not be published. Required fields are marked *